3m GE Siicones
   
Home
About Us
Materials
Products
Magnolia Plastics
Industries Served
Converter
E-mail Us
RFQ'S
           Ahesives . . .
 
<Back Page 2 of 3    Click for More...

Flexible Silicone Adhesives
  CHO-BOND conductive silicones are filled with silver-plated-copper, and cure into gasket-like seals when applied to properly primed metal surfaces. They are used to bond conductive silicone gaskets in place, and must be used in thin bond lines (8-10 mils). Metallic surfaces may require priming with CHO-BOND primer to improve adhesion. CHO-BOND 1075 adhesive is recommended for bonding CHO-SEAL 1285 gaskets.
   CHO-BOND 1029 compound is a two-component adhesive cured under pressure (6 psi/0.04 MPa, min.). Bond line thickness should not exceed 8 mils. The material possesses superior lap shear (450 psi/3.10 MPa, min.), and curing can be accelerated to 30 minutes at 250°F (121°C).
   CHO-BOND 1030 adhesive is a one-component RTV silicone, and cures by exposure to moderate humidity at room temperature. It has twice the peel strength of other RTVs and lap shear of 200 psi (1.33 MPa). For maximum conductivity, bond line thickness should not exceed 10 mils. Width should not exceed 0.5 inch (1.27 cm) for proper curing. The material cures under nominal pressure (1-2 psi/0.01 MPa) at temperatures not exceeding 150°F (66°C).
 Ordering Information
   
Product
Ordering Part Number
Unit/Size
CHO-BOND 360-20
CHO-BOND 360-208
CHO-BOND 360-208

CHO-BOND 584-29
CHO-BOND 584-29
CHO-BOND 584-29
CHO-BOND 584-29
CHO-BOND 584-29

CHO-BOND 584-208
CHO-BOND 584-208

CHO-BOND 592
CHO-BOND 592

CHO-BOND 1029A-B
CHO-BOND 1029A-B

CHO-BOND 1030
CHO-BOND 1030

Primers
CHO-BOND 1085
CHO-BOND 1086		 50-01-0360-0020
50-01-0360-0208
50-00-0360-0208

50-10-0584-0029
50-02-0584-0029
50-03-0584-0029
50-01-0584-0029
50-00-0584-0029

50-01-0584-0208
50-00-0584-0208

50-01-0592-0000
50-00-0592-0000

50-01-1029-0000
50-00-1029-0000

50-01-1030-0000
50-02-1030-0000


50-01-1085-0000
50-01-1086-0000		 1 pound kit (0.5kg)
1 pound kit (0.5kg)
3 ounce kit (85 g)

1 gram CHO-PAK (0.04 oz.)
2.5 gram CHO-PAK (0.1 oz)
10 gram CHO-PAK (0.4 oz)
1 pound kit (0.5kg)
3 ounce kit (85 g)

1 pound kit (0.5kg)
3 ounce kit (85 g)

1 pound kit (0.5kg)
3 ounce kit (85 g)

1 pound kit (0.5kg)
3 ounce kit (85 g)

1 pound cartridge (0.5kg)
4 ounce tube (113.4 g)


1 pint (0.47 L)
1 pint (0.47 L)
Note: Custom packaging can be accommodated. Please inquire.

Every shipment of Chomerics' conductive compounds is accompanied by a Certificate of Conformance to Chomerics specifications. Additional test reports can be obtained for a service charge. Quality control procedures conform to MIL-I-45208.