RTV Silicones HOME  |  ABOUT US  |  TAPE CONVERTING  |   PDF LIBRARY   |  CONTACT US  RTV Silicones
3m-tapes
Silicone Adhesives, ASAP Technologies

Distributors of 3M Tapes, 3M Adhesives & Momentive - GE Silicones

  
 
  WE ARE ISO9001 AND AS9120 CERTIFIED
  A Small Disadvantaged Women Owned Business		 Ask Our Expert
 
3m-tapes
 






















































silicone adhesives
 
 
FaceBookblog print RFQ rfq   search
ADHESIVES. . . CONDUCTIVE ADHESIVES / CHOMERICS CHO BOND . . . CHO BOND FLEXIBLE SILICONES. . .CHO BOND CAULKS AND SEALANTS

 CONDUCTIVE ADHESIVES / CHOMERICS - CHO BOND / FLEXIBLE SILICONE ADHESIVES

 1 Part Acetoxy
 
Flexible Silicone Adhesives
CHO-BOND conductive silicones are filled with silver-plated-copper, and cure into gasket-like seals when applied to properly primed metal surfaces. They are used to bond conductive silicone gaskets in place, and must be used in thin bond lines (8-10 mils). Metallic surfaces may require priming with CHO-BOND primer to improve adhesion. CHO-BOND 1075 adhesive is recommended for bonding CHO-SEAL 1285 gaskets.

CHO-BOND 1029 compound is a two-component adhesive cured under pressure (6 psi/0.04 MPa, min.). Bond line thickness should not exceed 8 mils. The material possesses superior lap shear (450 psi/3.10 MPa, min.), and curing can be accelerated to 30 minutes at 250°F (121°C).

CHO-BOND 1030 adhesive is a one-component RTV silicone, and cures by exposure to moderate humidity at room temperature. It has twice the peel strength of other RTVs and lap shear of 200 psi (1.33 MPa). For maximum conductivity, bond line thickness should not exceed 10 mils. Width should not exceed 0.5 inch (1.27 cm) for proper curing. The material cures under nominal pressure (1-2 psi/0.01 MPa) at temperatures not exceeding 150°F (66°C).
 Ordering Information
Product
Ordering Part Number
Unit/Size
CHO-BOND 360-20
CHO-BOND 360-208
CHO-BOND 360-208
 50-01-0360-0020
50-01-0360-0208
50-00-0360-0208
 1 pound kit (0.5kg)
1 pound kit (0.5kg)
3 ounce kit (85 g)
CHO-BOND 584-29
CHO-BOND 584-29
CHO-BOND 584-29
CHO-BOND 584-29
CHO-BOND 584-29
50-10-0584-0029
50-02-0584-0029
50-03-0584-0029
50-01-0584-0029
50-00-0584-0029		 1 gram CHO-PAK (0.04 oz.)
2.5 gram CHO-PAK (0.1 oz)
10 gram CHO-PAK (0.4 oz)
1 pound kit (0.5kg)
3 ounce kit (85 g)
CHO-BOND 584-208
CHO-BOND 584-208

 50-01-0584-0208
50-00-0584-0208		 1 pound kit (0.5kg)
3 ounce kit (85 g)
CHO-BOND 592
CHO-BOND 592
 50-01-0592-0000
50-00-0592-0000		 1 pound kit (0.5kg)
3 ounce kit (85 g)
CHO-BOND 1029A-B
CHO-BOND 1029A-B		 50-01-1029-0000
50-00-1029-0000		 1 pound kit (0.5kg)
3 ounce kit (85 g)
CHO-BOND 1030
CHO-BOND 1030		 50-01-1030-0000
50-02-1030-0000
1 pound cartridge (0.5kg)
4 ounce tube (113.4 g)
Primers
CHO-BOND 1085
CHO-BOND 1086
50-01-1085-0000
50-01-1086-0000
1 pint (0.47 L)
1 pint (0.47 L)
Note: Custom packaging can be accommodated. Please inquire.

Every shipment of Chomerics' conductive compounds is accompanied by a Certificate of Conformance to Chomerics specifications. Additional test reports can be obtained for a service charge. Quality control procedures conform to MIL-I-45208.


Phone: 800-896-7793
             770-614-1559		 A.S.A.P TECHNOLOGIES, INC.
 Fax:770-614-7636
ASAPTechnology