HOME | ABOUT US | TAPE CONVERTING | PDF LIBRARY | CONTACT US

Distributors of 3M Tapes, 3M Adhesives & Momentive - GE Silicones

WE ARE ISO9001 AND AS9120 CERTIFIED
A Small Disadvantaged Women Owned Business

ADHESIVES . . . DEVCON CYANOACRYLATES

DEVCON CYANOACRYLATES / ZIPGRIP®

PRODUCT	PART #	SIZE	BASE	COLOR	GAP FILL	VISCOSITY	SPECIFIC	ADHESIVE TENSILE SHEAR - ASTM D1002	CURE SPEED (sec)			SERVICE
						(cps@68°F)	GRAVITY	(etchAl/etchAl, psi)	Metal	Plastic	Rubber	TEMP. °F
General Purpose
ZipGrip® GPE 2 Plastic Bonder- Wicking	70050	1 oz bottle	Ethyl	Clear	.002 in.	2	1.06	3,200	-	4	< 4	-65 to 200
	70061	1 lb bottle	Ethyl
ZipGrip® GPE 3 Wicking	70144	14 g bottle	Ethyl	Clear	.003 in.	3	1.06	3,200	5-10	3-5	< 2	-65 to 200
	70145	2 g tube	Ethyl
	70161	1 lb bottle	Ethyl
ZipGrip® GPE 15 Rubber Bonder	70213	1/3 oz bottle	Ethyl	Clear	.005 in.	15	1.06	3,200	5-10	4-10	<3	-65 to 200
	70261	1 lb bottle	Ethyl
ZipGrip® GPE 30 All Purpose	70350	1 oz bottle	Neomer Ethyl	Clear	.004 in.	30	1.06	3,200	5-12	5-13	<6	-60 to 200
	70361	1 lb bottle	Ethyl
ZipGrip® GPE 100 All Purpose MV	70450	1 oz bottle	Ethyl	Clear	.004 in.	100	1.06	3,200	10-20	10-20	<15	-65 to 200
	70461	1 lb bottle	Ethyl
ZipGrip® GPE 125 Metal Bonder	70550	1 oz bottle	Ethyl	Clear	.004 in.	125	1.09	2,600	20-30	15-25	<15	-65 to 200
	70561	1 lb bottle	Ethyl
ZipGrip® GPE 180 Rubber Bonder, Hi Strength	70650	1 oz bottle	Ethyl	Clear	.006 in.	180	1.06	3,000	10-25	10-20	<4	-65 to 200
	70661	1 lb bottle	Ethyl
ZipGrip® GPE 1500 Plastic Bonder, Gap Filling	70750	1 oz bottle	Ethyl	Clear	.008 in.	1500	1.06	3,400	20-40	25-50	<10	-65 to 200
	70761	1 lb bottle	Ethyl
ZipGrip® GPE Gel	70940	20 g tube	Ethyl	Clear	.010 in.	Gel	1.08	3,500	50-70	25-65	20-30	-65 to 200
Surface Insensitive
ZipGrip® SIE 30 Wicking	71050	1 oz bottle	Neomer Ethyl	Clear	.004 in.	30	1.06	3,200	5-12	3-7	< 6	-60 to 200
	71061	1 lb bottle
ZipGrip® SIE 100 All Purpose	71150	1 oz bottle	Neomer Ethyl	Clear	.005 in.	100	1.06	3,200	8-12	3-7	< 6	-60 to 200
	71161	1 lb bottle
ZipGrip® SIE Gel	71940	20 g tube	Ethyl	Clear	.010 in.	Gel	1.08	3,500	50-70	25-65	20-30	-65 to 200
Rubber Toughened
ZipGrip® TE 500 Toughened Black	72050	1 oz bottle	Ethyl	Black	.006 in.	500	1.06	3,700	25-60	25-50	20-40	-65 to 280
	72061	1 lb bottle
ZipGrip® TE 1000 Gap Filling	72150	1 oz bottle	Ethyl	Clear	.008 in.	1000	1.06	3,700	25-40	25-50	20-50	-65 to 280
	72161	1 lb bottle
ZipGrip® TE 2400 Gap Filling, High Temp.	72250	1 oz bottle	Ethyl	Clear	.009 in.	2400	1.06	3,700	40-70	40-70	25-50	-65 to 280
	72261	1 lb bottle
ZipGrip® TE 5000 Gap Filling HV	72350	1 oz bottle	Ethyl	Black	.009 in.	5000	1.06	3,700	25-60	25-50	20-40	-65 to 280
	72361	1 lb bottle
ZipGrip® TE Gel Toughened	72940	20 g tube	Ethyl	Clear	.010 in.	Gel	1.06	3,700	45-70	45-60	30-60	-65 to 280
Low Odor
ZipGrip® LO 80 All Purpose	73050	1 lb bottle	Ethoxy Ethyl	Clear	.005 in.	80	1.06	2,600	25-40	20-25	< 15	-65 to 200
Primer
ZipGrip® PR 100 Accelerator	44444	2 oz pump	Acetone	Clear	-	1	0.715	-	-	-	-	-

Note: Additional information may be available on the technical datasheet. This chart contains typical property values and actual values or results may vary.
+ These sealants are not for use in delicate electrical and electronic applications in which corrosion of copper, brass and other sensitive metals is undesirable.
Cure times are typical values which may be affected by bead size, temperature, relative humidity, and the equipment used.
Full property development with standard condensation cure products may take 3 to 7+ days (at 25°C and 50% RH).
(1) IS802 does not currently meet FDA regulation 21CFR177.2600 "Rubber Articles Intended for Repeated Use.

Phone: 800-896-7793
770-614-1559

A.S.A.P TECHNOLOGIES, INC.

Fax:770-614-7636