 |
PERMATEX® LIQUID THREADLOCKERS |
|
| |
| Product |
Item Numbers |
Container Size |
Typical Use |
Color |
Viscosity cP |
Torque in. lbs.
* Break/Prevail |
Temperature
Range |
Cure Fixture **
(Full) |
Fixture/ with
Primer |
Specific Gravity |
Permatex® Low Strength
Threadlocker PURPLE |
22210 |
10 ml bottle |
Up to 1/4" (6mm) |
Purple |
1,200/5,000 Thixotropic |
62/27 |
-65° to
300°F |
20 min (24 hrs) |
5min |
1.05 |
| 22250 |
50 ml bottle |
(-54° to 149°C) |
| 22225 |
250 ml bottle |
|
Permatex® Medium Strength
Threadlocker BLUE |
9178 |
1ml pouch |
1/4" to 3/4" (6-20mm) |
Blue |
1,200/6,000 Thixotropic |
115/53 |
-65°
to 300°F |
20 min (24 hrs) |
5min |
1.00 |
| 24210 |
10 ml bottle |
(-54° to 149°C) |
| 24250 |
50 ml bottle |
|
| 24225 |
250 ml bottle |
|
| 24201 |
1L bottle |
|
Permatex® Surface Insensitive
Threadlocker BLUE |
24310 |
10 ml bottle |
1/4" to 3/4" (6-20mm) |
Blue |
2,250/12,000 Thixotropic |
180/62 |
-65° to 300°F |
20 min (24 hrs) |
5min |
1.08 |
| 24350 |
50 ml bottle |
(-54° to 149°C) |
| 24325 |
250 ml bottle |
|
| 24301 |
1L bottle |
|
Permatex® Permanent Strength
Threadlocker RED |
26210 |
10 ml bottle |
3/8" to 1" (10-25mm) |
Red |
1,800/5,000 Thixotropic |
189/275 |
-65° to 300°F |
20 min (24 hrs) |
5min |
1.10 |
| 26250 |
50 ml bottle |
(-54° to 149°C) |
| 26225 |
250 ml bottle |
|
| 26201 |
1L bottle |
|
| Permatex® High Strength
Threadlocker RED |
9179 |
1ml pouch |
3/8"to 1" (10-25mm) |
Red |
500 |
230/225 |
-65° to 300°F |
20 min (24 hrs) |
5min |
1.10 |
| 27110 |
10 ml bottle |
(-54° to 149°C) |
| 27150 |
50 ml bottle |
|
| 27125 |
250 ml bottle |
|
| 27101 |
1L bottle |
|
| Permatex® High Temperature
Threadlocker RED |
27210 |
10 ml bottle |
3/8"to 11/2" (10-28mm) |
Red |
10,000 |
180/270 |
-65° to 450°F |
30 min (24 hrs) |
5min |
1.11 |
| 27250 |
50 ml bottle |
(-54° to 232°C) |
| 27225 |
250 ml bottle |
|
| 27201 |
1L bottle |
|
| Permatex® Large Diameter
Threadlocker RED |
27710 |
10 ml bottle |
1" and over (25mm+) |
Red |
7,000 |
250/200 |
-65° to 300°F |
60 min (24 hrs) |
5min |
1.12 |
| 27750 |
50 ml bottle |
(-54° to 149°C) |
| 27725 |
250 ml bottle |
|
| 27701 |
1L bottle |
|
| Permatex® Penetrating Grade
Threadlocker GREEN |
29010 |
10 ml bottle |
#2 to 1/2" (2.2-12mm) |
Green |
12 |
90/310 |
-65° to 300°F |
20 min (24 hrs) |
3min |
1.08 |
| 29050 |
50 ml bottle |
(-54° to 149°C) |
| 29025 |
250 ml bottle |
|
| 29001 |
1L bottle |
|
| GEL THREADLOCKERS |
|
|
|
|
|
|
|
|
|
|
| Permatex® Medium Strength Threadlocker BLUE GEL |
24005 24010 |
5g GEL SQUEEZE™ |
1/4" to
1" |
Blue |
75,000/ |
115/53 |
-65° to 300°F |
15 min |
n/a |
1.15 |
| Applicator |
(6-25mm) |
900,000 |
(-54° to 149°C) |
(24 hrs) |
| 10 g GEL
TWIST™ |
Thixotropic |
| Applicator |
| Permatex® High Strength
Threadlocker RED GEL |
27005 27010 |
5g GEL SQUEEZE™ |
3/8" to
1" |
Red |
75,000/ |
175/230 |
-65°to 300°F |
15 min |
n/a |
1.13 |
| Applicator |
(10-25mm) |
900,000 |
(-54° to
149°C) |
(24 hrs) |
| 10 g GEL
TWIST™ |
and greater |
Thixotropic |
| Applicator |
|
|
- Note: Additional information may be available on the technical datasheet. This chart contains typical property values and actual values or results may vary.
- + These sealants are not for use in delicate electrical and electronic applications in which corrosion of copper, brass and other sensitive metals is undesirable.
- Cure times are typical values which may be affected by bead size, temperature, relative humidity, and the equipment used.
Full property development with standard condensation cure products may take 3 to 7+ days (at 25°C and 50% RH).
- (1) IS802 does not currently meet FDA regulation 21CFR177.2600 "Rubber Articles Intended for Repeated Use.
|
|
