Distributors of 3M Tapes, 3M Adhesives & Momentive - GE Silicones

Javascript Toolbar by Vista-Buttons.com v5.7
RTV SILICONES . . . MOLD MAKING SILICONES . . . ACCESSORY PRODUCTS . . . PRIMERS & ADDITIVES . . . 2 PART ADDITION CURE     -     PAGE 2

MOLD MAKING ACCESSORY PRODUCTS

	BETA 5	BETA 11-D1	BETA 16	BETA 17	BETA 18	BETA 26
Features	High temperature catalyst. This catalyst is not resistant to sulfur based clays. Generally suitable for jewelry molding and spin molding.	This catalyst is not resistant to sulfur-based clays.	Use of Beta 16 typically results in durometers 4 to 6 points higher than Beta 18. Generally suitable for use with sulfur-based clays.	Generally suitable for use with sulfur-based clays. Generally suitable for brush and lay-up molding.	Generally suitable for use with sulfur-based clays.	Very flexible, giving a range of durometers from 20 to 28 Shore A and fast demold times by adjusting the catalyst level. Suitable for use with sulfur-based clays. May be best suited for polyurethane casting resins.
Color	Red	Blue	Red	Clear	Red	Green
Viscosity (cps)	50	20	30	20	30	20
Specific Gravity	1.22	0.95	0.98	0.95	0.98	1.05
Work Life	45 minutes	70 minutes	60 minutes	8 to 12 minutes	60 minutes	Variable
Demold Time (hours)	12 to 16 hours	12 hours	12 to 16 hours	1 hour	12 to 16 hours	Variable
Cure Time	24 hours	24 hours	24 hours	3 to 4 hours	24 hours	< 24 hours

This chart contains typical property values and actual values or results may vary.