TEROSON MS 5570 is a high strength, high elongation adhesive used for elastic bonding and sealing on various substrates. It is a one component adhesive based on a Flextec polymer, which cures by reaction with moisture to an elastomeric thermoset product. The skin formation and curing times are dependent on humidity, temperature, and joint depth. By increasing the exposure to moisture these times can be reduced. TEROSON MS 5570 is sag resistant and has a high initial tack. It is non-corrosive, free of solvents, isocyanates, silicones, PVC, and is odorless. TEROSON MS 5570 demonstrates good adhesion to a wide variety of substrates and is compatible with suitable paint systems. It also demonstrates good UV resistance and can therefore be used for interior and exterior applications.

TEROSON MS 939 is an industrial elastomeric bonding adhesive that offers high versatility. The product demonstrates both high strength and good elasticity. TEROSON MS 939 meets the damp heat test for the solar industry and the UL listing for electrical equipment. It has excellent weathering resistance.

Non-Sag, Fast Set Time, High Tack

TEROSON MS 930 is a 1-part, white, grey or black, moisture-cured, thixotropic silane modified polymer sealant/adhesive. It is suitable for various applications involving a wide range of substrate materials. It forms a soft elastic product and provides excellent UV and weathering resistance. It complies with UL QMFZ2 for electrical safety.

Outstanding adhiesion and toughness, for bonding/sealing dissimilar substrates subjected to joint movement or impact.

LOCTITE SI 596 is a red, 1-part, flowable smooth, acetoxy silicone paste sealant. It forms a tough, flexible, waterproof, oil-resistant silicone rubber bond. It is also used as a sealant and adhesive in industrial furnaces, ovens, boilers, exhaust stacks, high temperature ducting and heating elements in electrical appliances.

Good resistance to extreme thermal and UV cycling without hardening, shrinking or cracking

Good resistance to extreme thermal and UV cycling without hardening, shrinking or cracking

LOCTITE SI 5910 is a low strength, silicone-based gasketing product designed for use on flexible flanges with machined or cast surfaces (metal or plastic). It is suitable for gaps up to 1 mm and offers a cure-through volume (in 24 h) of 2.75 mm. Typical applications include stamped sheet metal covers (timing covers and oil sumps).

LOCTITE SI 5900 is a low strength, moisture-cured, thixotropic silicone-based paste. Typical applications include stamped sheet metal covers (timing covers and oil sumps). It exhibits a rapid skin-over time of 15 min and is suitable for gaps up to 1 mm. As a single component it requires no mixing.

LOCTITE SI 5699 is a flexible silicone sealant and cures on exposure to moisture in the air to form a tough rubber gasket. The product is designed primarily for flange sealing with excellent oil resistance or rigid flange sealing for example on transmissions and cast metal housings. It is tack-free after just 10 min. The product is water-glycol resistant and can be used on machined or cast surfaces, metal or plastic.

LOCTITE SI 5039 is a light yellow, translucent, semi-flowable, acetoxy silicone sealant paste with the benefit of deep light cure capability, ultraviolet and visible, combined with a secondary moisture cure mechanism for shadow curing. Upon exposure to sufficient UV light, visible light or atmospheric moisture, this product forms a high strength rubber for gasketing and sealing applications.

LOCTITE NS 5550 is a thermal reactive fibrous paste sealing compound that is used in high temperature and high pressure applications. In the presence of heat, LOCTITE NS 5550 will cure to form a seal. It will not permanently join the flanges together and will not interfere with future repairs of metal-to-metal joints. This product is typically used at temperatures up to 1,500 F and seals up to 345 bar (5,000 psi) with correctly designed flanges.

LOCTITE NS 5540 is a brown, high strength, thermally reactive, heat-cured, liquid sealant for threads and flanges that is used in high temperature and high pressure applications. It will not cement flanges together thus allowing future repairs of metal-to-metal joints and is unaffected by thermal cycling. It has been successfully used to seal flanges carrying up to 2900 psi steam.

LOCTITE MR 5438 (known as LOCTITE NO MORE LEAKS) is a white thread sealant liquid with polymeric material, fillers and isopropyl alcohol, designed for the sealing of threaded plastic pipes, pipe fittings and flanges. It is ideal for irrigation, pump, well and swimming pool industries. This product is typically used in applications with an operating range of -59.8 F to +300.2 F (-51 C to +149 C).

Structural Hybrid Adhesive. LOCTITE HY 409 GY Universal Bonder: Generates strong, multi-material bonds without requiring additional surface primers. Provides a fast fixture rate of 3minutes that will not impede the proposed line speed. Results in assemblies that resist vibration, temperature changes and attack by high humidity

Structural Hybrid Adhesive. LOCTITE HY 4090 Universal Bonder: Generates strong, multi-material bonds without requiring additional surface primers. Provides a fast fixture rate of 3 minutes that will not impede the proposed line speed. Results in assemblies that resist vibration, temperature changes and attack by high humidity

Superfast Fixture Structural Repair Hybrid Adhesive. It works well on various substrates including most plastics, rubbers and metals. It is used where complete cure of excess adhesive as well as temperature and moisture resistance is required. Best application results are achieved with LOCTITE cyanoacrylate mixing nozzle

LOCTITE AA H8003 is designed to have a fast fixture time and excellent bond strength on multiple substrates which includes a variety of metals including galvanized steel, plastics and composites. LOCTITE AA H8003 offers superior peel and impact resistance

LOCTITE AA 3963 is an acrylic, liquid adhesive that offers high adhesion to rigid substrates such as stainless steel, polycarbonate, ABS, acrylic, and more. LOCTITE AA 3961 is suitable for disposable medical device assembly.

LOCTITE AA 3961 is an acrylic, liquid adhesive that is the optimal choice when bonding various metals and plastics as it maintains high adhesion to rigid substrates such as stainless steel, polycarbonate, ABS, acrylic, and more. LOCTITE AA 3961 is suitable for disposable medical device assembly.

LOCTITE AA 3953 is a colorless to straw-colored, transparent, fluorescent, medium viscosity, UV-cured, acrylated urethane acrylic adhesive designed for use where a fast-curing, highly flexible adhesive is required. It is used for bonding plasticized PVC, TPEs and thermostat rubbers. It also maintains high adhesion to rigid substrates such as polycarbonate, ABS, acrylic, HDPE, PP, etc.

Loctite AA 3951 is a colorless to straw low viscosity light cure adhesive designed for applications where a fast curing, highly flexible adhesive is required. It is an optimal choice when bonding plasticized PVC, TPEs, and thermoset rubbers. It also maintains high adhesion to rigid substrates such as polycarbonate, ABS, Acrylic, HDPE (when treated), PP (when treated) and more. Suitable for use in the assembly of disposable medical devices.

LOCTITE AA 3922 is a transparent, colorless, light-cured acrylic-based adhesive designed to deliver flexible bonds when joining stress-sensitive plastics. The product offers a depth of cure >13 mm and a fast fixturing time of 5 secs. Qualified to ISO 10993 for medical device applications, it also offers low yellowing in sunlight environments.

LOCTITE AA 352 is a transparent, amber, acrylic adhesive cured by activator and UV light. It is designed for applications that require the prevention of uncured anaerobic adhesive migrating from the joint. Good resistance to chemicals and high humidity. Ideal for the tough bonding of glass, metals and ceramics. Fixture time is 10 seconds and service temperature is -40 C to +150 C.

LOCTITE AA 3494 is a clear, low yellowing, light-cured, universal, acrylic-based instant adhesive suited to plastics and well suited to ceramics, glass and metals. It has a high, on-demand, curing speed. Depth of cure is >13 mm. Tack free time >30 secs. Fixturing time is 8 secs. Shore hardness: D 65. Very high viscosity 6,000 mPa's

Typical applications include bonding and sealing or potting applications of glass to itself or other materials, such as metals, coated metals, rough surface decorative glass, and molded glass tableware items for the appliance market.

The new LOCTITE 518 pen combines the leak-fighting properties of 518 Flange Sealant with a roll-on applicator that makes applying a liquid flange sealant easier than ever with no waste and no mess.

THREADLOCKER - LOCTITE 222MS is designed for the locking and sealing of threaded fasteners which require easy disassembly with standard hand tools. Particularly suitable for applications such as adjustment of set screws, small diameter or long engagement length fasteners, where easy disassembly is required without shearing the screw. The thixotropic nature of LOCTITE 222MS reduces the migration of liquid product after application to the substrate.

LOCTITE 5452 is a purple, thixotropic, methacrylate ester acrylic thread sealant liquid designed for threaded fittings commonly found in hydraulic and pneumatic systems. It is useful with dry seal fittings such as O-Ring boss style connectors. It can be used as a sealant on mating surfaces of flare style fittings. It contains no fillers or particles that can interfere with a hydraulic system.

LOCTITE 4902 is a colorless, clear, highly flexible ethyl and octyl cyanoacrylate instant adhesive designed for the assembly of flexible medical devices. It offers significant performance enhancements compared to standard cyanoacrylates, including strength in flexing bond lines and resistance to leaks with excellent sealing capability.

LOCTITE 4311 is a light yellow-green to dark blue-green, transparent, fluorescent, UV-cure, ethyl cyanoacrylate instant adhesive with photo-initiator. The UV-cure properties facilitate rapid curing of exposed surface areas thereby minimizing blooming and providing an alternative to solvent borne accelerators. It is suitable for use in the assembly of disposable medical devices.

LOCTITE 4310 is a transparent, light yellow-green to dark blue-green ethyl cyanoacrylate/UV liquid adhesive with photo initiator for bonding requiring very rapid fixturing, fillet- or surface cure. The UV light cure property facilitates rapid curing of exposed surface areas, minimizing blooming. It can be used in disposable medical devices and it has been qualified to Henkel's ISO 10993 Protocol.

LOCTITE 4204 is a transparent, colorless, high viscosity, general purpose ethyl-based instant adhesive. Suitable for metals, rubbers and plastic, it is also suitable for polyolefins in combination with Primer LOCTITE SF 770 or LOCTITE SF 7239. It has a fixture time of 10 - 30 secs.

LOCTITE 3092 is a two-component, rapid cure cyanoacrylate adhesive for bonding a variety of plastics (except PE, PP and PTFE), rubber and porous materials (wood, paper, leather). Under normal conditions, once dispensed in between close fitting parts, the atmosphere moisture initiates the curing process.This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials. For safe handling information on this product, consult the Material Safety Data Sheet (MSDS)

LOCTITE 660 is designed for the bonding of cylindrical fitting parts, particularly where bond gaps occurs without the need for remachining. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. LOCTITE 660 exhibits excellent gap cure characteristics and is also suitable for retaining shims.

LOCTITE 648 is a green, fluorescent, low viscosity, high strength, urethane methacrylate acrylic, anaerobic retaining compound designed for bonding cylindrical fitting parts. It prevents loosening and leakage from shock and vibration. Typical applications include holding gears and sprockets onto gearbox shafts and rotors on electric motor shafts. It provides robust curing performance.

LOCTITE 641 is designed for the bonding of cylindrical fitting parts, particularly where disassembly is required for servicing operations. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. Ideal for parts that need subsequent dismantling, i.e. retention of bearings on shafts and in housings.

LOCTITE 638 is designed for the bonding of cylindrical fitting parts, particularly with narrow bond gaps approaching 0.25 mm. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. It not only works on active metals but also on passive substrates, exhibiting robust cure performance. The product offers high-temperature performance and good oil tolerance, and tolerates minor surface contaminants.

LOCTITE 620 is a retaining compound designed for the bonding of cylindrical fitting parts. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. Typical applications include locating pins in radiator assemblies, sleeves in pump housings and bearings in auto transmissions. Particularly suitable for applications where temperature resistance up to 200��_��__C is required.

LOCTITE 609 is a green, high strength methacrylate ester acrylic retaining compound designed for the bonding of cylindrical fitting parts. The product cures in the absence of air between close fitting metal surfaces. Typical applications include rotor to shafts in fractional and subfractional horsepower motors. Locks bushings and sleeves in housings on shafts. Augments press fits.

LOCTITE 567 is designed for the locking and sealing of metal tapered threads and fittings. 567 provides robust curing performance. It not only works on active metals (e.g. brass, copper) but also on passive substrates such as stainless steel and plated surfaces. The high lubricating properties of this compound prevent galling on stainless steel, aluminum and all other metal pipe threads and fittings. The product offers high temperature performance and oil tolerance

LOCTITE 561 is designed for the locking and sealing of pre-torqued metal pipes and fittings. It is supplied in a self-feeding applicator stick that facilitates application of the material where a conventional liquid or paste product would be difficult to use. This industrial grade sealant develops controlled low strength to facilitate disassembly. This product also fluoresces for easy coverage inspection.

LOCTITE 545 is designed for the locking and sealing of metal pipes and fittings. This product is specially formulated to offer lubricity for easy assembly

LOCTITE 518 cures when confined in the absence of air between close-fitting metal surfaces. It is an anaerobic gasketing material designed for use on rigid iron, aluminum, and steel flanged mating surfaces. LOCTITE 518 fills gaps up to 0.25mm and forms a flexible, chemical-resistant seal that will not tear or decay. Parts disassemble easily, even after extended service. Typical applications include sealing close-fitting joints between rigid metal faces and flanges. It is also used as a formed-in-place gasket on rigid flanged connections, e.g. transmissions and motor housings.

LOCTITE 510 is a high temperature resistant anaerobic sealant which cures when confined in the absence of air between close-fitting metal surfaces. Typical applications include sealing rigid flange faces on transmissions and motor casings. It ensures an instant, low-pressure seal. The product increases the torque capacity of assembled flanges.

LOCTITE 495 is a transparent, colorless, low viscosity, general purpose ethyl-based instant adhesive offering fast bonding (5-20 secs fixture time). It is able to bond a wide range of materials, including plastics, rubbers and metals. It can also bond polyolefins when used in combination with Primer LOCTITE SF 770 or LOCTITE SF 7239

LOCTITE 480 is an instant adhesive designed for the assembly of difficult-to-bond materials which require uniform stress distribution and high tensile and/or shear strength. It is a rubber-reinforced adhesive offering increased flexibility and peel strength along with enhanced shock resistance. The product provides rapid bonding for a wide range of materials, including metals, plastics and rubbers. LOCTITE 480 exhibits good resistance in humid environments.

LOCTITE 460 is a transparent, colorless, low viscosity, low odor, low blooming alkoxyethyl-based product which provides rapid bonding (5-20 secs.) of a wide range of materials, including metals, plastics and elastomers. It is particularly suitable for applications where vapor control is difficult and is well suited to bonding porous or absorbent materials.

LOCTITE 454 is an instant adhesive designed for the assembly of difficult-to-bond materials which require uniform stress distribution and high tensile and/or shear strength. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and elastomers. The gel consistency enables overhead and vertical application. LOCTITE 454 is also suited to bonding porous materials such as wood, paper, leather and fabric. Perfect for all quick repair jobs.

LOCTITE 435 is a colorless, toughened, ethyl-based instant adhesive. It has a fixture time of 10 - 20 secs. It has high resistance to impact and shock loads, high peel strength and is suitable for bonding plastics, rubber, metals, porous and absorbent substrates and acidic surfaces. Good resistance in humid environments.

LOCTITE 406 is an instant adhesive designed especially for the fast bonding of plastics and rubbers. This product offers exceptionally low viscosity. When combined with LOCTITE primers for cyanoacrylates, it can also be use on difficult-to-bond plastics.

LOCTITE 404 is a transparent, colorless to straw colored, low viscosity, liquid ethyl cyanoacrylate adhesive designed for bonding of plastics and elastomeric materials where very fast fixturing is required.

LOCTITE 403 is a medium viscosity, low odor, low blooming alkoxyethyl-based product is particularly suitable for applications where vapor control is difficult. It provides rapid bonding of a wide range of materials, including metals, plastics and elastomers. It is particularly suitable for bonding porous or absorbent materials. Cyanoacrylate

LOCTITE 401 is a fast curing instant adhesive designed for the assembly of difficult-to-bond materials requiring uniform stress distribution and high tensile and/or shear strength. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and elastomers. LOCTITE 401 is also suited to bonding porous materials such as wood, paper, leather and fabric. Perfect for all quick repairs and all types of small emergency repairs.

LOCTITE 290 is designed for the locking and sealing of threaded fasteners. Because of its low viscosity and capillary action, the product wicks between engaged threads and eliminates the need to disassemble prior to application. The product can also fill porosity in welds, castings and powdered metal parts.

LOCTITE 277 is designed for the permanent locking and sealing of threaded fasteners. Ideal for large bolts with coarse threads.

Easy application, semisolid stick. LOCTITE 268 is a high strength version of an anaerobic threadlocking material. It is supplied as a wax-like semi-solid, conveniently packaged in a self-feeding stick applicator.

LOCTITE 263 is designed for the permanent locking and sealing of threaded fasteners. 263 is particularly suited for heavy duty applications such as studs into motor housings, nuts onto studs in pump housings and other fasteners where high strength is required. LOCTITE 263 provides robust curing performance. It not only works on active metals (e.g. brass, copper) but also on passive substrates such as stainless steel and plated surfaces. The product offers high temperature performance and oil tolerance. It tolerates minor surface contaminations from various oils, such as cutting, lubrication, anti-corrosion and protection fluids

LOCTITE 248 is a medium strength anaerobic threadlocking material. It is supplied as a wax-like semi-solid, conveniently packaged in a self-feeding stick applicator. It achieves consistent strength and can be used on a variety of metal substrates. It is particularly well suited for applications where a liquid product may be too fluid to stay on a part or be difficult to apply. It stores easily and allows for direct contact to a threaded part during application to ensure even coverage

THREADLOCKER, LOCTITE 243 is designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration.