Key Features and Benefits: Extremely fast room temperature cure' Two-component for controlled cure rate. Primerless adhesion to many substrates, Low odor, Non-corrosive to metals, compatible with plastics, Low temperature flexibility, Excellent weatherability, ozone, and chemical resistance, Excellent electrical insulation properties

Key Features and Typical Benefits: Excellent thermal conductivity, Low viscosity, Higher elongation than conventional products, Ready to use: one component, Heat accelerated cure, Excellent adhesive properties: Primerless adhesion to many types of substrates, Non corrosive to metals

SS4120 primer helps promote adhesion of Momentive Performance Materials addition cure RTVs and is used where clarity is needed. SS4155 is a general purpose primer for use with any RTV.

Key Features and Benefits: Primerless adhesion to many metals and plastics, Non-corrosive to most substrates, Low odor cure, One-component product - No mixing required, Retain elastomeric properties at temperatures of -60 C (-75 F) to 204 C (400 F) for long periods, and to 260 C (500 F) for short periods. Room temperature cure, Excellent electrical insulation properties, Excellent UV, chemical and weather resistance.

Key Features and Typical Benefits: Variable work times and cure rates by adjusting the amount and type of curing agent, Room temperature cure, Composition free of solvents and solvent odor, Excellent adhesion capabilities with primer, Excellent release properties, Retention of elastomeric properties at temperatures from -54 C (-65 F) up to 260 C (500 F) continuously, and up to 316 C (600 F) for short periods of time. Potential Applications: Typical high temperature applications for these products include, but are not limited to: Potting and encapsulating electric motors and transformers, Fabrication of rubber parts, Casting molds for low-melting point metals, Release applications such as rubber rollers, Thermal insulation.

Key Features and Benefits: Conforms to the physical and electrical requirements of MIL-S-23586E, Non-corrosive to copper, Retention of elastomeric properties at high temperature up to 204 C (400 F) continuously for SILTRUST™ RTV8111 and SILTRUST™ RTV8112, up to 260 C (500 F) continuously for RTV8262. Excellent adhesion capabilities when used with primer. Room temperature cure, Composition free of solvents.

KEY FEATURES: High elongation, Low shrinkage, Excellent adhesion, 30 minute cure capability at 60 C (140 F), Optically clear with a refractive index of 1.4, Non-yellowing

Key Features and Typical Benefits: One component product - no mixing required. Cures at elevated temperature, Low viscosity and semi-flowable, Primerless adhesion to many types of substrates, No cure by-products, low linear shrinkage, Non-corrosive to metals and sensitive substrates Flame retardant: UL94HB recognized (File No. E56745)

Silopren Gel 6209FC is specially developed for electronic potting applications such as hybrid IC insulation, potting of power modules and sensors when fast cure at room temperature is required. Key Features and Benefits: Convenient 1: 1 mixing by weight, Low viscosity, free of solvents, Fast room temperature cure, Soft, tacky gel, sticking to many substrates, Mechanical shock and vibration damping properties, Useful temperature range 50 C to 150 C.

SS4179 primer helps promote adhesion of Momentive Performance Materials sealant to difficult-to-bond plastic substrates including: acrylics, acrylonitrile-butadiene-styrene (ABS), cellulosics (cellulose acetate), high-impact styrene, polyphenylene, oxide resins (PPO), polysulfones, polyesters, rigid polyvinylchloride (PVC), thermoplastic resins (Noryl).

RTV9910 Paste version of DBT. Convenient 10:1 mixing ratio for use in automatic dispensing or hand operations. Excellent color contrast with red RTV base compounds provides visual evidence of complete mixing.

Key Features and Benefits: Conforms to the physical and electrical requirements of MIL-S-23586E, Non-corrosive to copper, Retention of elastomeric properties at high temperature up to 204 C (400 F) continuously for SILTRUST™ RTV8111, and SILTRUST™ RTV8112 up to 260 C (500 F) continuously for SILTRUST™ RTV8262. Excellent adhesion capabilities when used with primer. Room temperature cure Composition free of solvents.

SS4120 primer helps promote adhesion of Momentive Performance Materials addition cure RTVs and is used where clarity is needed. SS4155 is a general purpose primer for use with any RTV.

Key Features and Benefits: Conforms to the physical and electrical requirements of MIL-S-23586E, Non-corrosive to copper, Retention of elastomeric properties at high temperature up to 204 C (400 F) continuously for SILTRUST™ RTV8111 and SILTRUST™ RTV8112, up to 260 C (500 F) continuously for SILTRUST™ RTV8262. Excellent adhesion capabilities when used with primer, Room temperature cure, Composition free of solvents.

Key Features and Typical Benefits: Convenient 1:1 mix ratio by weight/volume, Middle viscosity easily pourable Room temperature curability, Soft, tacky and sticky gel, Shock absorption and protection of delicate mechanical components from vibration Absence of reactive by-products that may contribute to corrosion. Color is Transparent

SNAPSIL™ RTV11 white 11,000 cps , SNAPSIL™ RTV21 pink 26,000 cps , SNAPSIL™ RTV41 white 39,000 cps: Key Features and Benefits: Work time and cure rates can be varied, Room temperature cure, Composition free of solvents and solvent odor, Potential Applications: Potting and encapsulating electrical coils and connectors, Making cast-in-place gaskets and molds, Release applications such as providing a surface on metals and fabrics from which paint and adhesives can be easily stripped. FDA compliance. RTV11 and RTV41 silicone rubber compounds can be used in food contact applications other than contact with acidic foods where FDA regulations apply. Excellent adhesion capabilities with primer, Excellent release properties, Retention of elastomeric properties at temperatures from -54 C (-65 F) up to 204 C (400 F) continuously, and up to 260 C (500 F) for short periods of time.

Key Features and Typical Benefits: One component products - no mixing required, Fast cure at elevated temperature, Primerless adhesion to many substrates, Non-corrosive to metals and sensitive substrates, Excellent dielectric properties, Outstanding performance over a wide thermal range.

Key Features and Benefits Provides low outgassing characteristics in a high vacuum environment, Room temperature cure, Excellent release properties, Excellent adhesion capability with primer, Retains elastomeric properties from -115 C (-175 F) up to 260 C (500 F) continuously and up to 316 C (600 F) for short periods of time.

Typically used as a Thermal Interface Material (TIM), adhesive and for gap filling. Thermal conductivity of 3W/mk. Useful temperature range of -40 C (-40 F) to 150 C (302 F).

SS4004P and SS4044P primers help promote adhesion to metals (such as aluminum, copper, steel, stainless steel, brass, and galvanized metals), porous materials, unglazed ceramics and wood. SS4004P primer is bright pink, providing easy visual determination of uniform coating. SS4044P primer is virtually identical to SS4004P primer, but is designed for applications where discoloration of the substrate is undesirable.

RTV9910 Paste version of DBT. Convenient 10:1 mixing ratio for use in automatic dispensing or hand operations. Excellent color contrast with red RTV base compounds provides visual evidence of complete mixing. Provides extended pot life over RTV9950

Key Features and Benefits: One-component product, Thixotropic (paste-like) consistency, Capability to cure at room temperature and ambient humidity conditions, Excellent electrical insulation properties, Excellent weatherability, ozone and chemical resistance.

Key Features and Typical Benefits: One component product - no mixing required, Room temperature storage, Very fast cure at elevated temperature (in a range of 110 C to 230 C), Primerless adhesion to many types of substrates (e.g. aluminum, copper, stainless steel, glass, enamel, ceramic), No formation of cure by-products; low linear shrinkage, Non-corrosive to metals and sensitive substrates, Outstanding performance over a wide temperature range Service temperature -50 C to 250 C

Key Features and Typical Benefits: Low viscosity permits excellent potting, Transparent appearance. Cure rate can be accelerated by heat. No reactive by-products: no concerns regarding corrosion. Excellent resistance to temperature extremes.

Key Features and Typical Benefits: High thermal conductivity, Low thermal resistance, Thin bond lines, Highly workable -excels in screen-printing and dispensing processes, Wide operating temperature range (-40 C ~ 150 C), Minimal weight loss at elevated temperatures, Minimal ionic impurities.