SNAPSIL™ RTV100 Series Key Features and Benefits: One-component products, capability to cure at room temperature and ambient humidity. Self-adhesion properties, Low temperature flexibility, High temperature performance. Excellent weatherability and ozone and chemical resistance, Excellent electrical insulation properties.

Key Features and Typical Benefits: Excellent thermal conductivity, Low volatility; reduced low-molecular siloxane content, One-component; ready to use, Room temperature cure, Neutral cure; non-corrosive to metals Low odor cure; releases an alcohol vapor during cure. Excellent adhesion to most substrates.

Typically used as a Thermal Interface Material, Gap filling with a 4 W/mK thermal conductivity. Useful temperature range of -40 C (-40 F) to 150 C (302 F).

Key Features: Temperature resistance, Low modulus, good dampening properties, Low viscosity, Tacky adhesion at RT, High dielectric strength (> 18 kV/mm) Typical Benefits: Under the hood usage, Thermal and mechanical stress protection, Easily flow around components prevent formation of thermally induced voids, Reliability. Potential Applications: Sensor potting, ECU potting, Power module potting, Cable joints.

Key Features and Typical Benefits: Convenient 1:1 mix ratio by weight, Low viscosity allows for superior flowability. Excellent flammability properties (UL94 V-0 recognized). Excellent thermal conductivity properties. Excellent adhesive properties. Primerless adhesion to many substrates. Excellent heat resistance.

InvisiSil OP2131SD UV-cure optical bonding silicone. Potential Applications Optical bonding for Automotive and Consumer Displays. Color: Transparent

Key Features and Typical Benefits: Good thermal conductivity, Fast cure with exposure to heat, Easy to use 1:1 mixing ratio by weight or volume Flame Retardant: UL94 V-0 certified (File No. E56745)

SNAPSIL™ RTV142 ADHESIVE SEALANT Key Features and Benefits: One-component material, Room temperature cure, Primerless adhesion to many substrates, Low odor, Non-corrosive to metals, Low volatility, Low temperature flexibility, High temperature performance, Excellent weatherability, ozone and chemical resistance

Key Features and Typical Benefits: Good thermal conductivity, Low viscosity, Fast cure with exposure to heat, Room temperature cure capability, Easy to use 1:1 mix ratio by weight and volume, Repairability, Non-corrosiveness to metal, UL 94V-0 Compliance (file number E56745)

Key Features and Benefits: Variable density between 5 and 16 pounds per cubic foot, Non-halogenated, fire retardant foam, Low smoke generation, Low toxicity combustion by-products, Room temperature process capable, Foam develops without use of CFCs.

Key Features and Typical Benefits: Low viscosity allows for excellent flowability, Fast cure and excellent deep section cure, Excellent adhesive properties: primerless adhesion to many types of substrates, No cure inhibition. Flame retardant: UL94HB recognized (File No.E56745) :TSE3660(A)/(B)

Potential applications for SILTRUST™ RTV511 SILICONE RUBBER COMPOUND include: cast-in-place heat shielding, Thermal insulation, Low and high-temperature bonding, Potting and encapsulation of electrical assemblies

Key Features and Benefits; Convenient 1:1 mix ratio by weight or volume for use in automatic dispensing or hand operations. Chemical composition contains no solvents for ease of use on production lines. Low viscosity allows easy flow in and around complex parts. Cure rate can be accelerated by heat. Will cure in deep sections or enclosed assemblies without exotherm, and with low shrinkage. Reversion resistant and hydrolytically stable. Recognized by Underwriters Laboratories with a flammability classification of UL94V-0 in a sample thickness of 3.2 mm (0.125 in.). RTV627 silicone rubber compound is recommended for evaluation in applications such as a production line potting compound to, provide protection of electronic components and assemblies against thermal shock, vibration, moisture, ozone, dust, chemicals, and other environmental hazards. Other applications include encapsulation of high voltage transformers, voltage regulators, power converters and complete power supplies.

Key Features and Typical Benefits: Primer-less adhesion to most commonly used metals and plastics, non-corrosiveness with most commonly known substrates, Low odor, room temperature cure, single-component product; no required mixing. Retention of elastomeric properties at temperatures of -60 C to 204 C for long periods and to 260 C for short periods, Efficient electrical insulation properties, Excellent UV, chemical, and weather resistance. Potential Applications: Electronic enclosures Protection and weatherproofing of under-hood assemblies, Door modules Sealing of forward and rear lighting.

Key Features and Benefits: Provides low outgassing characteristics in a high vacuum environment, Room temperature cure, Excellent release properties, Excellent adhesion capability with primer, Retains elastomeric properties from -115 C (-175 F) up to 205 C (400 F) continuously and up to 260 C (500 F) for short periods of time.

Flowable, High-elongation gel at cure, with low temperature heat cure, transparent. Mix ratio 100:100 by weight

RTV9910 Paste version of DBT. Convenient 10:1 mixing ratio for use in automatic dispensing or hand operations. Excellent color contrast with red RTV base compounds provides visual evidence of complete mixing. Provides extended pot life over RTV9950.

Key Features and Typical Benefits: Convenient 1:1 mix ratio by weight/volume Room temperature curability Soft, tacky and sticky gel Shock absorption and protection of delicate mechanical components from vibration, Absence of reactive by-products that may contribute to corrosion. Color is Transparent

Potential Applications: Displays for high ambient light environments. Automotive, consumer, and industrial electronics. Heavy-duty displays and touchscreens. Direct view technologies. Optical potting and other functional applications. Display, screen, and touch sensor layers in structure

Key Features and Typical Benefits: Easy to use - one component, no mixing required, long pot life, Low viscosity - pours easily, penetrates complex assemblies, Heat accelerated, cure Fast heat cure system. Soft, tacky, sticky gel Absorbs shock and protects delicate mechanical components from vibration.

KEY FEATURES: High elongation, Low shrinkage, Excellent adhesion, 30 minute cure capability at 60 C (140 F), Optically clear with a refractive index of 1.4, Non-yellowing

Key Features and Benefits of DBT and STO: Simple handling procedures and equipment use for easy and low processing cost. Adjustable work time and cure rate obtainable through choice of curing agent and level used.

Key Features and Typical Benefits: Convenient 1:1 mix ratio by weight Low viscosity permits excellent potting, Transparent appearance, Primerless adhesion to a variety of materials including, metals, and some plastics. No reactive by-products: no concerns regarding corrosion. Excellent resistance to temperature extremes.

Key Features and Benefits: High thermal conductivity, Low volatility: reduced low molecular siloxane content, Non-corrosive to metals (including copper) One-component, fast alkoky cure, Wide operating temperature range: -40 C ~ +150 C

Key Features and Typical Benefits: Fast tack-free time, Low volatlity, Non-corrosive to most metals, Primerless adhesion to many substrates, Low odor, cure: releases an alcohol vapor during cure Flame retardant (UL94HB recognized, File No. E56745)