Search All Products

Mold Making Compound, Medium durometer, good dimensional stabiity.

A translucent two-part addition cure mold development grade, TSE3453 high-strength silicone rubber is formulated with high tensile and tear strength, yet able to remain at a stable, medium hardness with good elongation. These characteristics allow TSE3453 high-strength silicone rubber to mold parts that may have a significant taper and undercut, such as those with molds that need to be pulled over any sharp edges.

Catalyst for mold making materials. Use of Beta 16 typically results in durometers 4 to 6 points higher than Beta 18. Generally suitable for use with sulfur-based clays.

Mold making compound, lowest viscosity product. Good resistance to urethanes.

a two part, addition cure mold making silicone rubber from Momentive Performance Materials. This grade will cure to a translucent, high strength, high hardness elastic silicone rubber with the addition of the curing agent.

Catalyst for mold making materials. This catalyst is not resistant to sulfer-based clays.

Catalyst for mold making materials. Generally suitable for use with sulfur-based clays.

Catalyst for mold making materials. Generally suitable for use with sulfur-based clays. Generally suitable for brush and lay-up molding.

Catalyst for mold making materials. Very flexible, giving a range of durometers from 20 to 28 Shore A and fast demold times by adjusting the catalyst level. Suitable for use with sulfur-based clays. May be best suited for polyurethane casting resins.

RTV5810 series sealants are neutral cure, one-component, ready-to-use silicone adhesive sealants that cure to tough resilient silicone rubber on exposure to atmospheric moisture at room temperature. RTV5813 is Black, RTV5818 is Translucent. Key Features and Benefits Primerless adhesion to many metals and plastics Non-corrosive to most substrates Low odor cure Good confined cure properties One-component product - No mixing required Retain elastomeric properties at temperatures of -60�C (-75�F) to 204�C (400�F) for long periods and to 260�C (500�F) for short periods Room temperature cure Excellent electrical insulation properties Excellent UV, chemical and weather resistance

RTV102, RTV103, RTV106, RTV108, RTV109, RTV112, RTV116 and RTV118 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure.

RTV102, RTV103, RTV106, RTV108, RTV109, RTV112, RTV116 and RTV118 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure.

RTV102, RTV103, RTV106, RTV108, RTV109, RTV112, RTV116 and RTV118 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure.

RTV102, RTV103, RTV106, RTV108, RTV109, RTV112, RTV116 and RTV118 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure.

RTV102, RTV103, RTV106, RTV108, RTV109, RTV112, RTV116 and RTV118 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure.

RTV102, RTV103, RTV106, RTV108, RTV109, RTV112, RTV116 and RTV118 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure.

RTV102, RTV103, RTV106, RTV108, RTV109, RTV112, RTV116 and RTV118 one-component, ready-to-use adhesive sealants are extremely versatile. They cure to a tough, durable, resilient silicone rubber on exposure to atmospheric moisture at room temperature. Acetic acid vapors are released from the sealant surface as a by-product of cure.

RTV5818 sealant is a neutral cure, one-component, ready-to-use silicone adhesive sealants that cure to tough resilient silicone rubber on exposure to atmospheric moisture at room temperature. Color is Translucent. Key Features and Benefits Primerless adhesion to many metals and plastics Non-corrosive to most substrates Low odor cure Good confined cure properties One-component product - No mixing required Retain elastomeric properties at temperatures of -60�C (-75�F) to 204�C (400�F) for long periods and to 260�C (500�F) for short periods Room temperature cure Excellent electrical insulation properties Excellent UV, chemical and weather resistance

RTV5813 sealant is a neutral cure, one-component, ready-to-use silicone adhesive sealants that cure to tough resilient silicone rubber on exposure to atmospheric moisture at room temperature. Color is Black. Key Features and Benefits Primerless adhesion to many metals and plastics Non-corrosive to most substrates Low odor cure Good confined cure properties One-component product - No mixing required Retain elastomeric properties at temperatures of -60�C (-75�F) to 204�C (400�F) for long periods and to 260�C (500�F) for short periods Room temperature cure Excellent electrical insulation properties Excellent UV, chemical and weather resistance

Heavy flat stock backing that is abrasion and moisture resistant and filters U.V. rays. Rubber adhesive that is stain and transfer resistant and long aging to help reduce clean up and can be used for long periods of time (up to 6 months) and still provide reasonably clean removal under most conditions.

Perfect Your Straight Lines and Sweeping Curves - Scotch Fine Line Tape 218 features a natural rubber pressure adhesive capable of delivering the high instant adhesion necessary for critical, large-scale paint applications. This tape has proven itself to be ideal for painting long, straight lines as well as smooth, sweeping curves. The polypropylene backing is stiffer than vinyl fine line tapes, while conforming easily around corners. Scotch Fine Line Tape 218 features good moisture and solvent resistance. It resists heat in bake cycles that reach 250 F/121 C for up to 30 minutes.

Create Detailed and Fine Paint Lines - 3M Vinyl Tape 471+ is a high-temperature paint masking tape designed to create sharp paint lines on complex jobs, including critical paint applications that feature detailed designs or curves. It has a semi-translucent indigo film backing designed to provide some visual clarity for alignment during application. Designed with unique stretch properties, this tape conforms to rough, irregular, curved and convex surfaces. Tape remains stretched, without lifting to avoid paint bleed. The rubber adhesive offers quick stick and excellent holding strength on most substrates. 3M Vinyl Tape 471+ can be used in bake cycles at temperatures up to 250 F/121 C for up to 30 minutes. Once finished, it removes cleanly from most surfaces without adhesion build-up or ghosting. Conformability, instant adhesion and clean removal all make 3M Vinyl Tape 471+ an exceptional choice for your most critical paint masking operations.

Linered version of 3M Aluminum Foil Tape 425. Thermally conductive tape helps dissipate heat and improves heating and cooling efficiency to protect temperature sensitive materials. Resistant to chemicals to protect surfaces during de-paint process and other chemical masking operations.

Thermally conductive tape helps dissipate heat and improves heating and cooling efficiency to protect temperature sensitive materials. Resistant to chemicals to protect surfaces during de-paint process and other chemical masking operations. Highly engineered acrylic adhesive provides long term durability, but removes cleanly after harsh masking applications.

Transparent Film Tape for High Temperature Applications. Scotch Light Duty Packaging Tape 610 is a transparent film tape that was specifically designed for use in high heat applications. It is typically used in high temperature tabbing and general packaging applications. The natural rubber adhesive gives this tape high initial bond strength and a wide adherence to a variety of materials, including hard-to-bond plastics. The cellophane backing material offers heat resistance.

3M SCOTCH Transparent Film Tape for Cold Temperature Applications. 3M Scotch Light Duty Packaging Tape 605 is a 2.5 mil (0.064 mm) thick transparent film tape with a medium strength acrylic adhesive which adheres instantly to a wide variety of surfaces. The polypropylene backing material offers good clarity with moisture, chemical and UV resistance. It is commonly used for general packaging and cold temperature applications.

Ideal for Vinyl & Plastic, 3M Nitrile High Performance Plastic Adhesive 1099 bonds to a variety of substrates primarily leather and most vinyl sheeting as used in awnings, upholstery and faux leather as well as plastics, for a strong, enduring bond. However, it may stain thin or light-colored vinyls.

BUNDLE AND REINFORCE! Designed with an adhesive that provides good initial adhesion and holds well with minimum rub-down, Scotch Filament Tape 897 is a general purpose solution for a variety of bundling and reinforcing applications. The backing, filaments and adhesive combine to provide high tensile and shear strength compared to general purpose tapes. It allows for printing and illustrations to be seen through the tape. This tape holds under a wide range of application conditions with a minimum amount of tape, leading to lower cost for applications where high tensile strength is a main requirement.

A Versatile Rubber and Gasket Adhesive, 3M Neoprene High Performance Rubber and Gasket Adhesive 1300 is one of our most versatile solvent-based adhesives for rubber and gaskets. This adhesive bonds neoprene, reclaimed, SBR and butyl rubbers to metal, wood and most plastics. It provides excellent heat and water resistance, performing in temperatures up to 300 F/148 C. 3M Neoprene High Performance Rubber and Gasket Adhesive 1300 dries quickly while allowing time for positioning and adjustments without slowing down work processes.

A Versatile Rubber and Gasket Adhesive, 3M Nitrile High Performance Rubber and Gasket Adhesive 847 is one of our most versatile solvent-based adhesives for rubber and gaskets. This adhesive bonds neoprene, reclaimed, nitrile rubber (BUNA), SBR and butyl rubbers to metal, wood and numerous plastics. It provides excellent heat and water resistance, performing in temperatures up to 300 F/148 C. 3M Nitrile High Performance Rubber and Gasket Adhesive 847 dries quickly and offers an open bonding range of up to 15 minutes, allowing time for positioning and adjustments without slowing down work processes.

Ideal for EPDM and Rubber: 3M Industrial Adhesive 4799 delivers a tough bonding solution that provides resistance to both heat and water. We formulated our Industrial Adhesive 4799 to be a brushable adhesive, capable of establishing a strong, flexible bond that will stand the test of time.

Adheres Stainless Steel, Aluminum, Cold Rolled Steel and Many Plastics. 3M Neoprene High Performance Contact Adhesive 1357 has played a significant role in 3M's portfolio of contact adhesives for 50-plus years. Since its inception in 1954 it has become one of our most versatile solvent-based adhesives for heavy duty surface laminations. This adhesive bonds to plastics and metals, including sheet metal, stainless steel. It provides excellent heat and water resistance, performing in temperatures up to 300 F/148 C. 3M Neoprene High Performance Contact Adhesive 1357 (PDF, 393.2 Kb) dries quickly while allowing time for positioning and adjustments without slowing down work processes.

Aggressive Hot Tack Rapidly Achieves Handling Strength-3M Hot Melt Adhesive 3762 is 100% solids, thermoplastic resin formulated to grab and seal quickly to meet the demands of high-volume production settings such as packing, woodworking and assembly. These features increase the speed of carton closures and provide adhesion to wood, paperboard, corrugated and other fibrous substrates. It provides strong shear strength, which means your packages stay sealed and components stay bonded under most conditions. A 25 second open time, along a 1/8" bead, is sufficient for positioning and adjusting for fit and supports high-tempo productivity for packaging, woodworking, and applications that involve fibrous materials. The low viscosity prevents stringing even at fast production speeds.

Open Bond Time Allows for Fit Adjustment and Positioning-3M Hot Melt Adhesive 3792 features a 50 second open time that allows for positioning and adjustment on wood, polypropylene, corrugated boxes and lightweight substrates. Its nearly instant bonding property reduces production time for POP assembly, joining, attaching, securing, repairing, potting, panel bonding, wire tacking, bundling, sealing, encapsulating, rigidizing, foam bonding, and packaging. For use with a 3M Hot Melt Applicator.

3M Value Masking. Cost effective tape for indoor light duty applications. Temperature resistant up to 150 F (66 C) for 30 minutes.

UL181A-P and UL181B-FX Listed and ULC S102 Classified - 3M 1581A Venture Tape UL181A-P Aluminum Foil Tape is a 4.0 mil, high strength aluminum foil tape coated with a cold weather adhesive. The aluminum foil backing is malleable and conforms well around corners and to irregular surfaces. This tape provides an excellent vapor seal in various duct board sealing applications. It is rugged, durable and easy to install without additional tools or application methods.

Bi-Directional Reinforcement for Added Strength! Constructed with continuous fiberglass yarns in both the longitudinal and transverse directions, Scotch Bi-Directional Filament Tape 8959 provides cut edge protection and resists abrasion and splitting. A synthetic rubber adhesive provides high initial adhesion and holds well with minimum rub-down on most surfaces. The backing, filaments and adhesive combine to provide high tensile and shear strength compared to general purpose tapes. It allows for printing and illustrations to be seen through the tape. This tape holds under a wide range of application conditions with a minimum amount of tape, leading to lower cost for applications where high tensile strength is a main requirement.

FOR BIG JOBS! Strapping tapes are high strength, reliable and affordable solutions for product and package integrity. The tape is designed to secure shelving, racks, doors, panels, cords and parts in place, from plant to install. Available in multiple colors, Scotch Strapping Tape 8898 features high tensile strength and the polypropylene backing provides proper stiffness for manual or semi-automatic dispensing. It offers abrasion, moisture, and scuff resistance for strapping and to hold spacers, corner boards, power cords and other hard-to-manage parts firmly in place.

3M General Use Masking Tape, The tough tape for everyday jobs. General indoor use. Light-to-medium duty. Smooth and conformable. Sticks with confidence to a wide variety of surfaces. Easy to handle, apply and remove in one piece .Ideal for bundling, labeling and identifying

Aerospace-Level Strength and Reliability - The natural rubber adhesive of our tape sticks instantly and allows fast application along with reliable holding power that resists lifting. 3M Paint Masking Tape 231/231A demonstrates superior adhesive transfer resistance with clean removal that helps reduce labor and clean up. Its smooth mini- crepe backing results in excellent surface contact and is also solvent and moisture resistant to minimize bleed-through. A special backsize treatment provides a smooth unwind for easy handling and reduced waste. It is easy to tear, which aids in handling, yet strong enough to resist slivering, providing "user friendly," one piece removal. 3M Paint Masking Tape 231/231A is conformable for easy masking around corners, over irregular surfaces, and offers easy handling that reduces application time. As a professional grade masking tape, it has the benefit of paint flake resistance that reduces contamination and potential rework, resulting in a professional paint job. This tape can be certified to ASTM D-6123

3M Performance Yellow Masking Tape, The dependable choice for industrial performance. Good conformability to irregular surfaces. Resists paint bleed-through. Great paint lines. Yellow backing ensures good visibility. Ideal for industrial paint masking, bundling, holding, marking, color coding and sealing. Withstands surface temperatures up to 225 F (107 C) for 30 minutes

3M Extreme Sealing Tape, highly conformable, single-sided, pressure sensitive acrylic adhesive tape with a high performance ionomer backing. It is an ideal solution for creating a water tight seal. It conforms over fasteners, seams, joints, holes and gaps to ensure a long-lasting seal on a variety of substrates.This single coated tape is designed to seal over an existing joint, seam, or penetration. The adhesive is designed to adhere well to the ionomer film so that overlapping tape joints can be made while maintaining a strong seal.

3M High Performance Green Masking Tape, The industrial strength GREEN colored performance. Highly conformable to many surfaces. Superior adhesion to metal, rubber, glass and plastic. Removes cleanly in one piece with no residue. Resists paint bleed-through. Creates sharp paint lines. Green backing improves visibility and accuracy during paint masking. Ideal for high performance industrial painting, including two-tone color application on trucks, buses, trailers, trains, fire trucks, ambulances and airplanes. Withstands surface temperatures up to 250 F (121 C) for 30 minutes

Great usability fits contours and curves. Sticks and stays with clean removal. Robust backing that resists solvents and moisture

3M Specialty High Temperature Purple Masking Tape, The highest degree of industrial performance. Exceptionally conformable to irregular surfaces. Superior adhesion to metal, rubber, glass and plastic. Creates super-sharp paint lines. Smooth crepe backing keeps your fingers in good shape during application. Easy unwind reduces fatigue and improves productivity. Purple color ensures you're using the right tape for high temperature masking jobs. Ideal for high temperature industrial paint masking applications in aerospace, automotive and specialty vehicle markets. Withstands surface temperatures up to 300 F (149?C) for 30 minutes

Create Detailed and Fine Paint Lines - 3M Vinyl Tape 471+ is a high-temperature paint masking tape designed to create sharp paint lines on complex jobs, including critical paint applications that feature detailed designs or curves. It has a semi-transluc

3M 5-Way Penetrant also works as an excellent light-duty lubricant and can dry out electronics. It has proven to inhibit corrosion and rust in certain applications.

IDEAL FOR AEROSPACE - 3M Specialty High Temperature Masking Tape 5501A sticks instantly to most surfaces, including metal, rubber, glass and plastic, as well as EPDM-type rubber moldings while removing cleanly in one piece. Our high-strength crepe-paper backing is designed at imperial widths to meet FAA regulations and features a thick backing proven to be excellent when tensioning for layout. It conforms to irregular surfaces, resists bleed through from most industrial paint systems, improves visibility during the paint masking process, and helps you achieve super sharp paint lines.

High Performance Sealant for Durable Applications, 3M Adhesive Sealant 740 UV offers excellent UV resistance and long term durability when exposed to the elements. This sealant is permanently elastic and is capable of bonding dissimilar materials, offering long-lasting bonds and design flexibility. This single-component sealant is paintable when wet and has a 40-60 minute skin time.

It features an easy liner release for both manual and hand applications, which makes it a perfect choice for high-speed flying splices and zero splices on most grades of paper in commercial print applications

3M Adhesive Remover Low VOC <20%: cleans without streaking and have proven to be excellent for surface preparation in adhesive applications. While these multipurpose cleaners are suitable for industrial use, they are also safe enough for everyday projects.

FOR BIG JOBS! Strapping tapes are high strength, reliable and affordable solutions for product and package integrity. The tape is designed to secure shelving, racks, doors, panels, cords and parts in place, from plant to install. Available in multiple colors, Scotch Strapping Tape 8899HP features high tensile strength and the polypropylene backing provides proper stiffness for manual or semi-automatic dispensing. It offers abrasion, moisture, and scuff resistance to hold spacers, corner boards, power cords and other hard-to-manage parts firmly in place.

A Tape with Instant Bond - Originally developed for heating, ventilation and air conditioning (HVAC) applications, duct tape is used today in a variety of maintenance, repair and construction settings. 3M All Purpose Duct Tape DT8 offers high instant adhesion coupled with maximum conformability, making it an ideal tape for contoured surfaces. It can be applied in temperatures as low as 40 F and used in temperatures as high as 150 F for up to 30 minutes. This is the most stretchable 3M duct tape and bonds firmly to a number of substrates including plastic, glass and sealed concrete.

This transfer tape is an excellent solution for bonding high and low surface energy materials. It can also be used for joining materials that have rougher surfaces.

Withstands Exposure to High Heat and Humidity - Consisting of a dead soft, thermally conductive aluminum backing, 3M Aluminum Foil Tape 425 (PDF, 1.66 Mb) dissipates heat over the surface of the tape to reduce hot spots and protect the substrate from the effects of high temperatures. Coated with our highly engineered acrylic adhesive, it is capable of withstanding exposure to high heat (up to 300 F/149 C) and humidity while maintaining a strong and reliable bond. This tape can withstand a variety of moisture, weathering, UV and solvents in order to provide an excellent work life, indoors or out.

3M Cartridge "conical" Roll 341D has a closed coat of aluminum oxide abrasive secured with a heat-resistant resin bond. Cartridge rolls fit onto a cartridge roll mandrel (sold separately) and are ideal for accessing small, hard to reach spaces. 3M Cartridge Roll 341D is used in metalworking applications. Aluminum oxide is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural abrasives dull more quickly. Due to its fast cut-rate, hardness, and strength, it is widely used in grinding applications in addition to sanding and finishing applications. Aluminum oxide is suitable for a wide variety of materials in both woodworking and metalworking, including ferrous alloys.

3M Chemical Sorbent Spill Response Pack SRP-CHEM is encased in a box which can be used as a warning sign and includes mini-booms, pads and disposal bag.

Faceshield mounts quickly to any 3M Headgear without tools, snaps or cams. Faceshield mounts inside headgear crown for added splash protection. Chemical Resistant. Clear

Self-leveling repair material applies with a common caulk gun and flows freely into horizontal repair areas. It hardens in as little as five minutes and allows for sanding and refinement in 15 minutes, eliminating downtime.

Seal, Seam and Splice Sheathing and Housewrap - 3M Construction Seaming Tape 8087CW is a versatile sheathing tape designed for seaming, splicing, sealing and repairing materials used for moisture barriers, both inside and out. This includes sheathing, weather resistant barriers and moisture barriers. Taping seams aids in reducing air infiltration, improves the effectiveness of insulation and reduces heating and cooling costs. This tape is formed from a rugged biaxially oriented polypropylene film backing which is coated with an aggressive industrial grade pressure sensitive acrylic adhesive. The backing is conformable to irregular surfaces and contours to help ensure a tight seal. It remains flexible when cold, can be applied from 10 F/-23 C to 185 F/85 C and has a service temperature range from -40 F/-40 C to 185 F/85 C. This tape features a low moisture vapor transmission rate and does not compromise the performance of vapor barriers. It unwinds easily by hand or with a 3M hand-held applicator.

Excellent for jobs requiring dexterity when handling sharp parts. Typical applications include handling abrasive or sharp materials; forming, bending or machining sharp parts; cable pulling and wire handling; cable preparationTwo varieties allow you to customize your cut level to the job's requirements. The CG-CR (L3) series is rated ANSI Cut Level 3, EN388 4544 and is nitrile foam coated. The CG-CRE (L2) series is rated ANSI Cut Level 2, EN388 4343 and is polyurethane coated. Both are varieties are washable and feature a knit wrist cuff style.

The sponge can be used wet or dry and can be rinsed and reused. Extremely flexible pad for hard to sand areas.

3M Cubitron II Hookit Clean Sanding Film Disc 775L discs are ideal for a broad range of applications focused primarily on stock removal, and are effective on a wide variety of substrates, including metals, composites, gelcoat, and whitewood. The film backing offers greater tear resistance than paper discs, for additional durability and edge retention. For best results, pair with 3M Elite Random Orbital Sanders. The triangular shaped ceramic mineral is designed to slice through the substrate, rather than gouging or plowing like conventional abrasives, resulting in a disc that cuts up to 2x as fast and lasts up to 6x as long as conventional abrasives.

3M Cubitron II products have raised the bar for high-performing abrasives. 3M Precision-Shaped Grain outcuts and outlasts conventional ceramic industrial abrasives and requires less grinding force to achieve superior performance. The result is that operators can grind faster and complete more parts per disc with less muscle-work and fatigue.

M Diamond Grade Conspicuity Markings Series 983 is a highly reflective microprismatic lens sheeting. Highly reflective at wide angles. Aggressive, pressure-sensitive adhesive.

3M Diamond Grade Conspicuity Markings Series 983 is a highly reflective microprismatic lens sheeting, Superior polycarbonate for smooth surfaces, Vivid yellow, Durable-resists weather, dirt and aging, Aggressive, low-temperature application adhesive

High reflectivity, superior angularity and excellent nighttime brightness

Flexible Foam Tape for Irregular Surfaces - Speed up the mounting process and achieve a more aesthetically pleasing installation with 3M Double Coated Polyethylene Foam Tape 4496. This 1/16 in. thick polyethylene foam tape is known for its high ultimate adhesion and reliable performance across many surfaces. One of its noted features is its ability to conform to irregular substrates. It provides high ultimate adhesion to many plastics and is formulated for demanding indoor and outdoor general purpose mounting and bonding applications. Common uses include automotive mirror bonding, decorative trim, nameplates and other general purpose mounting applications.

Versatile Bonding - 3M Double Coated Urethane Foam Tape 4026 is a 1/16 in. thick tape manufactured with 3M Adhesive 100 for a strong, permanent bond that works well with the open cell foam structure to produce high shear strength. This tape offers an ideal solution for a wide selection of bonding issues on various surfaces. This includes both interior and exterior applications where the tape will be protected from the environment. This tape features a conformable foam and adhesive combination which provides long-term holding at temperatures up to 220 F (104 C). By using a robust, green plaid, densified kraft paper liner, this tape provides you with reliable performance for industrial applications, such as die-cutting and automated dispensers. The liner also helps reduce edge roll and protects the tape from humidity extremes.

High Performance Adhesion - 3M Double Coated Tape 9737 is a 3.5 mil double-sided tape mounted on a 55 lb. densified kraft paper liner. In addition, it has a thin polyester carrier with a pressure sensitive acrylic adhesive that offers a balance of high initial adhesion and good holding power. It offers excellent temperature performance in various applications. When it comes to longevity, this tape will perform well up to 300 F/149 C in the short term, and up to 260 F/127 C for days or weeks. Results may vary depending on machine and web tensions, line speeds, nature of paper surface and application pressure. It adheres well to kraft and coated papers, and is commonly used for high performance splicing on paper, films and other continuous web processes. Notably, this product is offered in two colors clear and red. The red version can be used for visible splicing applications.

3M Dual Lock Reclosable Fastener SJ3540 and TB3540 is designed to deliver a durable, reclosable fastening solution (which can be opened and closed multiple times) which bonds to a variety of substrates including many plastics and low surface energy materials. Made with rubber adhesive. For indoor use.

3M Dual Lock Reclosable Fastener SJ3550 is designed to deliver a durable, reclosable fastening solution (which can be opened and closed multiple times) which bonds to a variety of substrates including metals and plastics such as acrylics, polycarbonate and ABS. Made with white acrylic adhesive. For indoor/outdoor use.

3M Dual Lock Reclosable Fastener 3560 is designed to deliver a durable, reclosable fastening solution which bonds to a variety of substrates including metals, glass and plastics such as acrylics, polycarbonate and ABS. Made with clear acrylic adhesive. For indoor/outdoor use.

Slow recovery, low pressure foam conforms to the unique shape of each ear for enhanced comfort and wearability

Effective hearing protection and compliance with a clean, easy twist.

They can be cleaned easily with soap and water. There is no need to roll them down before inserting.

3M Fastbond Contact Adhesive 30NF was designed to create a very strong bond resistant to high heat with a bonding range of up to four hours. It is deal for decorative laminate applications where non-flammability and low VOCs are critical. Post-formable and heat resistant, it is non-flammable in the wet state, which makes in an optimal solution in settings where fire protection is of utmost concern. Adhesive can be applied by spray, brush or roller. Non-flammable in its wet state.

Premium Performance Tackles Carbon Steel Applications: 3M Fibre Disc 782C Balance cost and output by selecting the abrasive with precisely the right amount of cut and life, no more and no less. 3M Fibre Disc 782C contains Precision Shaped Grain (PSG) to optimize the balance of speed and longevity for many of your carbon steel operations. Disc construction includes a stiff fiber backing and strong resin bond that provide durability and tear-resistance, which along with fast-cutting abrasive grain enables operators to complete more parts per disc and requires fewer disc changes. The exceptional life and cut of 3M 782C Fibre Disc make it one of 3M's best grinding discs for high production environments, providing significant gains over conventional fiber discs. When our highest-tier fiber disc may be under-utilized but productivity is still your bottom line, 3M 782C Fibre Disc delivers outstanding throughput. This fiber disc is an excellent choice for a range of applications.

The Advanced Solution for Challenging Applications: Balance cost and output by selecting the abrasive with precisely the right amount of cut and life, no more and no less. 3M Fibre Disc 787C contains the exact amount of precision shaped grain (PSG) you need to optimize the balance of speed and longevity for challenging applications from grinding to deburring. Moreover, to keep the disc and workpiece cool, a grinding aid is incorporated, further prolonging disc life. Disc construction includes a stiff fiber backing and strong resin bond that provide durability and tear-resistance, which along with abrasive grain enables operators to complete more parts per disc and requires fewer disc changes. The exceptional life and cut of our 787C Fibre Disc make it one of 3M's best grinding discs for high production environments, providing significant gains over conventional fiber discs. When our highest-tier fiber disc may be under-utilized but productivity is still your bottom line, our 787C Fibre Disc delivers outstanding throughput. This fiber disc is an excellent choice for a range of applications.

3M Fire and Water Barrier Tape, when installed properly it can act as a barrier to water leakage and airborne sound transmission, while helping to control the transmission of fire, heat and smoke.

3M Fire Barrier Rated Foam can be used to fill the annular space created by pipes and cables penetrating through fire-rated construction. It's an alternative to mineral wool, bricks, pillows and runny, ineffective foams and is UL listed. UPC Description S

3M Fire Barrier Sealant CP 25WB+ helps control the spread of fire, smoke and noxious gases before, during and after exposure to a fire.

3M Flap Disc 769F: Powered by 3M Precision-Shaped Grain, it lasts longer and cuts faster than conventional aluminum oxide and alumina zirconia flap discs and it's priced for affordability and everyday use. This unbeatable combination of performance and value can increase productivity while also lowering your abrasive spend. UPC Size Max RPM Grade T

Tried and Tested Fire Protection: Ready-to-use, 3M Fire Barrier Water Tight Sealant 3000 WT is an intumescent, silicone elastomeric sealant. This gun-grade sealant cures upon exposure to the atmosphere to form a monolithic flexible firestop seal and, when properly installed, this product provides up to 4-hour fire protection in tested and listed systems. This sealant is water-tight to help prevent the intrusion of moisture. It is an ideal choice for CPVC piping. We formulated this sealant to help prevent the spread of fire, smoke and noxious gas and firestop joints and through penetrations through floor slabs, walls and other fire-rated building partitions and assemblies.

Fast-Acting, Long Lasting! 3M Foam Fast 74 Spray Adhesive is a long-time member of 3M's portfolio of go-to, everyday-use adhesives considered by many to be necessary at the factory. For many, "getting the job done" is just a spray away. 3M Foam Fast 74 Spray Adhesive has an aggressive tack that offers a high initial grab with foam-tearing strength, yet allows sufficient open time to position materials properly. High-solids content supports its low soak-in property, giving you time to position parts for best fit. This attribute also provides higher coverage than competing spray adhesives and helps create soft, non-dimpling glue lines. The lace-spray pattern of its non-yellowing adhesive, combined with its fast tack, strong bond and clean appearance, make it ideal for projects of all kinds. 3M Foam Fast 74 Spray Adhesive is also offered in low-VOC aerosols, as well as non-flammable cylinders and bulk.

The UVicator sensor changes color as the hard hat is exposed to UV light. White. UPC P

Code, Mark, and Protect - 3M General Purpose Vinyl Tape 764 is a vinyl tape coated with a rubber adhesive and ideally suited for a variety of coding, temporary surface protection, bundling, marking and protection applications. The rubber adhesive offers quick stick and good holding strength on many substrates. Unlike messy paint solutions, this vinyl tape is quick to install and easy to clean-up. Conformability and instant adhesion makes 3M General Purpose Vinyl Tape 764 a good choice for marking and warning applications on floors, equipment, walls and pipes.

Fit for Foam and Fabric; 3M Foam Fast 74 CA Spray Adhesive - Low VOC <25% has an aggressive tack that offers a high initial grab with foam-tearing strength, yet allows sufficient open time to position materials properly. High-solids content supports its low soak-in property, allowing time to position parts for best fit. This attribute also provides higher coverage than competing spray adhesives and helps create soft, non-dimpling glue lines. The lace-spray pattern of non-yellowing adhesive, combined with fast tack, a strong bond and clean appearance, make it ideal for bonding foam and fabric onto a wide array of materials, including paper, cardboard, plastic, metal, wood and much more. This adhesive is CARB* and SCAQMD compliant, GREENGUARD certified and helps contribute to LEED credits.

The UVicator sensor changes color as the hard hat is exposed to UV light. White.

Identify and Warn with this Distinctive Tape - 3M Safety Stripe Vinyl Tape 766 is a distinctive yellow and black striped vinyl tape coated with a rubber adhesive and designed for use as a marking tape for a variety of warning applications. The rubber adhesive offers quick stick and good holding strength on many substrates. Unlike messy paint solutions, this vinyl tape is quick to install and easy to clean-up. Conformability and instant adhesion makes 3M Safety Stripe Vinyl Tape 766 a good choice for marking and warning applications on floors, equipment, walls and pipes.

3M Safety Stripe Vinyl Tape 767 is an economical vinyl tape option for color coding, bundling and safety marking applications. We've designed this tape to resist wear, weathering and light abrasion while providing good instant adhesion to many surfaces. It is available in red and white stripes. 766 & 767 Can be easily applied witht our 3M Lane Marking Applicator M-1

A Tape with Versatility - Originally developed for heating, ventilation and air conditioning (HVAC) applications, duct tape is used today in a variety of maintenance, repair and construction settings. 3M Heavy Duty Duct Tape 3939 is an excellent choice for general indoor application in MRO and construction. The tape was tested for flame spread using test method UL723, ASTM E84 and can be used at temperatures as high as 200 F for up to 30 minutes. The sturdy cloth-reinforced tape can be torn from the roll by hand and sticks instantly, providing a wide range of convenient solutions. This tape has a classic silver-colored backing.

Ideal for cleaning machinery, engines, factory floors, tools, trucks and metal parts. Quickly penetrates grease, oil and a variety of soils.

3M High Flow Series Filter Housings are 33% to 50% smaller than competitively sized housings for a given flow rate. Fewer filters and a user-friendly housing design means faster change-outs than competitively sized systems. Our high flow series filter housings are available in a variety of sizes to accommodate from 1 to 7 filter elements in both 40-inch and 60-inch lengths. Choose the horizontal option to maximize ease of operation, or the vertical to minimize the system's footprint. 3M High Flow Series Filter Housings housings are designed with features that make them easy to use and streamline processes. Spend less time cleaning thanks to removable cartridge posts that lift out for easy cleaning, which helps maintain cleaner systems and longer product life.

A Tape with Versatility - Originally developed for heating, ventilation and air conditioning (HVAC) applications, duct tape is used today in a variety of maintenance, repair and construction settings. 3M Heavy Duty Duct Tape DT11 is considered a go-to choice for demanding jobs. It can be applied in temperatures as low as 40 F and used in temperatures as high as 150 F for up to 30 minutes. This polyethylene tape can be torn from the roll by hand and sticks instantly, providing a wide range of convenient solutions. It holds well to a variety of surfaces, including plastic.

With its general performance rubber-based pressure sensitive adhesive backing, this fastener allows for easy and convenient attachment to a variety of substrates, including plastics. For indoor use.

With its general purpose acrylic-based pressure sensitive adhesive backing, this fastener allows for easy and convenient attachment to a variety of substrates, including plastics such as polycarbonate, acrylic, ABS, polystyrene. For indoor/outdoor use.. 3M High Temperature Hook and Loop Fastener SJ60H/SJ60L, with its general purpose acrylic-based pressure sensitive adhesive backing, this fastener allows for easy and convenient attachment to a variety of substrates, including plastics such as polycarbonate, acrylic, ABS, polystyrene. For indoor/outdoor use. UPC Product ID Type S

Fast-Acting, Long Lasting! 3M Hi-Strength 90 Spray Adhesive is a long-time member of 3M's portfolio of go-to, everyday-use adhesives considered by many to be necessary at the factory. Recognized worldwide, this spray adhesive has demonstrated its reliability in countless applications. For many, "getting the job done" is just a spray away. This spray adhesive offers a high initial grab, sufficient bonding range and fast dry time. The high-solids content provides higher per square foot coverage than competing spray adhesives. The combination of maximum-strength bond and clean appearance make it ideal for projects of all kinds.

Fast-Acting, Long Lasting! 3M Hi-Strength 90 CA Spray Adhesive - Low VOC <25% has a very aggressive tack that combines a high initial grab with sufficient open time to position materials properly. High-solids content provides higher coverage than competing spray adhesives. This spray adhesive offers sufficient bonding range and fast dry time to make it ideal for projects of all kinds. This adhesive is CARB* and SCAQMD compliant, GREENGUARD certified and helps contribute to LEED credits. * Meets applicable 2017 California Air Resource Board VOC limits for mist and web spray adhesives.

Fit for Foam and Fabric! 3M Hi-Strength 94 ET Spray Adhesive holds strong in critical applications and is often used in marine and specialty vehicle applications to install carpet, rubber or synthetic flooring. The formula's more aggressive tack offers a fast grab with sufficient open time to position and adjust materials before bonding, reducing rework and increasing flexibility. With a solids weight percentage of 20 - 25 and a non-telegraphing spray pattern, this adhesive provides higher coverage with less waste than competing spray adhesives and helps create a uniform hold. As with all contact based adhesives, sufficient and uniform pressure should be applied to ensure a strong bond. This adhesive is CARB* and SCAQMD compliant, GREENGUARD certified and helps contribute to LEED credits.